Foxy 60 FW
SMALL
0.6 m X 1.5 m
6 lines
9 m hanging space
MEDIUM
0.6 m X 2.0 m
6 lines
12 m hanging space
LARGE
0.6 m X 2.5 m
6 lines
16 m hanging space
Foxy 75 FW
SMALL
0.75 m X 1.5 m
8 lines
12 m hanging space
MEDIUM
0.75 m X 2.0 m
8 lines
16 m hanging space
LARGE
0.75 m X 2.5 m
8 lines
20 m hanging space
Foxy 100 FW
SMALL
1 m X 1.5 m
10 lines
15 m hanging space
MEDIUM
1 m X 2.0 m
10 lines
20 m hanging space
LARGE
1 m X 2.5 m
10 lines
25 m hanging space
Foxy 120 FW
SMALL
1.2 m X 1.5 m
12 lines
18 m hanging space
MEDIUM
1.2 m X 2.0 m
12 lines
24 m hanging space
LARGE
1.2 m X 2.5 m
12 lines
30 m hanging space
Assemble frame
Assemble the washline frame by inserting the round tubes into the corner components of the side arm. Stabilise the frame by tightening the screws in each corner component.
Establish height
Established where you want to position your washline. At a height of approximately 1.8 m, at the rightmost point, drill a 6 mm pilot hole. Insert wall plug into the hole and secure round base socket to the wall through the centre pilot hole.
To obtain the best possible wall plug grip, follow the Fischer guidelines indicated in the diagram below:
Position RHS
Mount the RHS of the washline frame so that the frame hangs loosely from the round base socket.
Position LHS
Lift washline until in a level position, while maintaining this position, mark drilling point for LHS round base socket. Drill, insert wall plug and secure round base socket to the wall. Lift washline frame and locate to wall.
Secure top level
Insert split pins on both LHS & RHS to secure and complete the pivot.
Secure support arms
Lift one sidearm to a level position, mark, drill and secure round socket to the wall. Repeat on other side ensuring a level frame is maintained.
Line up
Release sidearms, and while the washline is in a down position, line up from top to bottom. To tighten repeat from top to bottom by pulling each line down.
